異丙威-D3同位素

CERTIFICATE OF ANALYSIS

Isoprocarb-D3 

Product Name: Isoprocarb-D3

Catalog Number:75275

Labeled CAS Number：N/A

Unlabeled CAS Number:  2631-40-5

Appearance：White crystal

Lot Number：1851903

Date of Analysis：May-27th-2019

Certificate Expiration:  36 months from date of receipt (proper storage and handling required).   

Long-Term Storage: The compound should be stored at -18℃ freezer, under inert atmosphere.                                  

Page  of /75275-5mg,-Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO 9001.

Product Name Isoprocarb-d3Product Code75275-5mg Lot Number- CAS No.N/A Unlabeled CAS No.2631-40-5 Mol. Weight196.26 Mol. FormulaC11H12D3NO2 Melting PointN/A Expiry Date2028-Nov-21 Boiling pointN/A AppearanceWhite to Off-White Solid__ Storage Temp(20±5)℃,Keep in the shadeC E R T I F I E DPurity99.9%(Isotopic Value:99.8%) C E R T I F I E DExpanded Uncertainty (U)0.8%Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level(k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards. The calibration of the balances is verified annually by an external accredited calibration service. This analysis method has been verified using an approach consistent with ISO 17034:2016 & ISO 17025:2017.

CERTIFICATE    ON	QC    SIGNATURE
-		RM Release

Method of Identification

HPLC/DAD

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Storage

This reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature here in. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture.

Hazards

Read Material Safety Data Sheet (MSDS) and understand any potential hazard(s) prior to the use of this product. All chemicals should be considered potentially hazardous in nature and should only be handled by qualified personnel using established good laboratory practices.

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample.Visit the support section of our website technology videos and frequently asked questions.

以上信息僅供參考，請以實物批次為準！